CalAmp SMC-CDMA Series Скачать руководство пользователя страница 42

Страница: 42 / 62

001-0004-819 Rev01

Page 42 of 62

Network Related & User Interface Commands

The AT Commands in this section aply to various network and user interface functions and
parameters. For futher information, refer to the Motorola C24 AT Command Set document available
from Motorola

[1]

Table 10.14: Network Commands

Command

Description

AT+CREG

This command enables/disables the network status registration
unsolicited result code.

AT+CSQ

This command displays the signal strength received by the C24.

AT+MSSI

This command enables/disables the unsolicited report for signal
strength value.

AT+NETPAR

This command displays information regarding the active, candidate,
and neighbor cell.

AT+MDISP

This command is used to display characters that the network sends to
the module.

AT+MDORMANT This command enable/disable the dormant indication unsolicited

report.

AT+MPREFMODE This command configures System Select setting.
AT+MBAND

This command selects Preferred Band.

Table 10.15: User Interface & Access Commands

Command

Description

AT+CLAN

This command handles the selection of language in the ME.

AT+CMER

Mobile Equipment Event Reporting.

AT+CIEV

An unsolicited indication regarding various phone indications that is
sent to the DTE when the <ind> parameter of the +CMER command is
set to 1.

AT+MMR

This command perform master reset.

AT+MMRR

This unsolicited message is sent to the DTE by the SMC modem if a
master reset occurs, and master reset events reporting is enabled.

AT+CIND

This command is used to query the status of various ME indicators.

This command repeats the last command entered on the terminal.

This command checks the AT communication and only returns OK.

AT+MPIN

This command enables the accessory application to unlock the phone
when the appropriate unlock code has been provided.

AT+CPWD

This command sets a new password for the facility lock.

AT+CLCK

This command locks, unlocks or interrogates a SMC Modem or a
network facility <fac>.

AT+CCLK

This command reads/sets the SMC modem’s current date and time
settings.

AT+CPBS

This command handles the selection of the memory to be used for
reading and writing entries that contain more than one phone book
memory.

AT+CPBR

This command recalls phone book entries from a specific entry
number, or from a range of entries.

AT+CPBF

This command searches the currently active phone book for a
particular entry, by name.

AT+CPBW

This command stores a new entry in the phone book, or deletes an
existing entry from the phone book.

Содержание SMC-CDMA Series































































Результаты поиска

Содержание SMC-CDMA Series

Отзывы:

Похожие инструкции для SMC-CDMA Series

Бренды по названию

Популярные бренды

CalAmp SMC-CDMA Series, Руководство пользователя

Результаты поиска

Содержание SMC-CDMA Series

Отзывы:

Похожие инструкции для SMC-CDMA Series

Бренды по названию

Популярные бренды