49-2001131 Rev. 1
7
Selecting Cooktop Settings
USING THE COOKT
O
P:
Selecting Cooktop Settings / How
T
o
Synchronize Left Elements
Choose the element/burner that is best fit to the
cookware size. Each element/burner on your new
cooktop has its own power levels ranging from low to
high. Power level settings necessary for cooking will vary
depending on the cookware being used, the type and
quantity of food, and the desired outcome. In general
use lower settings for melting, holding and simmering
and use higher settings for heating quickly, searing
and frying. When keeping foods warm confirm selected
setting is sufficient to maintain food temperature above
140°F. Larger elements and elements marked “Keep
Warm” are not recommended for melting.
Hi is the highest power level, designed for large quantity
rapid cooking and boiling. Hi will operate for a maximum
of 10 minutes. Hi may be repeated after the initial 10
minute cycle by pressing the
+
pad.
CAUTION
Do not place any cookware, utensils or
leave excess water spills on control key pads. This may
result in unresponsive touch pads and turning off the
cooktop if present for several seconds.
How To Synchronize Left Elements
NOTE:
Sync Burners is only intended for cookware that spans both burners.
To Turn On
Touch the
Sync Burners
pad to connect the two
burners. Operate either element as previously described
to adjust power level.
To Turn Off
1. Touch the
On/Off
pad on either burner to turn off the
Sync Burners.
or
2. Touch the
Sync Burners
to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
melting
Low
Содержание CHP9030
Страница 21: ...49 2001131 Rev 1 21 Notes...
Страница 45: ...49 2001131 Rev 1 21 Notes...
Страница 69: ...49 2001131 Rev 1 21 Notas...
