9/23 www.cadis.be [email protected]
User’s Manual
Aquavision Control
Monitoring Module
ensure that you are entering the correct data. Both the network settings of the actual module, and the e-mail
addresses for sending alarms can be set or changed in this screen.
N.B.
: If you change the IP address, you must connect with the module via this new IP address. If the wrong data are
entered, this can cause problems with the connection.
2.3.
Connection with a CADIS Aquavision Master module
At the bottom of the Network settings page, you can also enter an IP address for the Aquavision MASTER module.
N.B.
: This should only be done if a CADIS MASTER module has been installed, which centralises all consumption
data. If not, leave this blank.
2.4.
Centralisation of consumption data by a central computer
With this module it is also possible to monitor the water consumption of several buildings centrally via a central
server. If this is the case for this module, the IP address of this central server must be entered in the screen below.
Contact Cadis for additional information about this functionality.
