12/23 www.cadis.be [email protected]
User’s Manual
Aquavision Control
Monitoring Module
This function must only be ticked if this external contact for indefinite water consumption has been
installed. (Closed contact = indefinite water consumption activated)
To avoid water damage occurring in buildings where nobody is present, a relay contact can be linked via the
burglar alarm system to the AV CONTROL module. When the burglar alarm system is switched on, the AV
CONTROL module will automatically cut off the water supply by closing the shut-off valves. When the
burglar alarm system is switched off, the AV-Control module will re-open the water supply. The following
message appears on the screen and in the module when the burglar alarm is activated:
This function should only be ticked if an external contact for the burglar alarm system has been installed.
(Closed contact = Burglar alarm system activated)
2.8.
Checking whether the module was correctly configured after installation
Go to the web page of the heading "Input settings"
