6/23 www.cadis.be [email protected]
User’s Manual
Aquavision Control
Monitoring Module
On the same alarm screen, the user can easily create alarm reports for a particular period in order to get a better
insight into the alarms or to inform colleagues. This can be done by choosing a start date (click on "From") and end
date (click on "To") and then confirming that this period is correct and that you want to create a report.
Below is a list of possible alarm reports:
Large leak alarm
Leak alarm for very large leak e.g. burst pipe
Leak
Leak alarm detected that was calculated by the module
Small leak
Module detected a small leak
Very small leak
Leak alarm for a micro leak (alarm after 24 hours)
Average daily
consumption exceeded
(%)
Alarm report if the daily water consumption is higher than the average
daily consu the percentage that you have defined
Average weekly
consumption exceeded
(%)
Alarm report if the weekly water consumption is higher than the
average weekly consu the percentage that you have defined
Volume restriction
Alarm if the volume, which is set by the user, has been reached,
Alarm leak detection
external system
Alarm report if the external leak detection system sets off an alarm
Valve malfunction
Alarm if the functional test with the shut-off valve fails.
