background image

9

CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9

Fig. 1 - Exploded drawing

LEGENDA 

WHERE TO DISPOSE

MATERIALS

A. OUTER CLADDING

If there is any, to be disposed of separately based on 

the material used:

Metal                                   

Glass                                       

Tiles or ceramics  

Stone                                     

B. GLASS DOORS

If there is any, to be disposed of separately based on 

the material used:

Glass ceramic (fire door): to be disposed of with 

inert or mixed waste

Tempered glass (oven door): to be disposed of with 

glass 

C. INTERIOR CLADDING

If there is any, to be disposed of separately based on 

the material used:

Metal

Refractory materials      

Insulating panels

Vermiculite 

Insulation, vermiculite and refractory materials 

that have come into contact with flames or exhaust 

gases (dispose of in mixed waste)

D. ELECTRIC AND ELECTRO-

NIC COMPONENTS

To be disposed of separately in authorised centres, 

as indicated in the WEEE directive 2012/19/EU and 

the relative national transposition.

Wiring, motors, fans, circulators, display panels, 

sensors ignition plug, electronic cards, batteries.

E. METAL STRUCTURE

To be disposed of separately with metal                      -

F. COMPONENTS THAT CAN-

NOT BE RECYCLED

To be disposed of with mixed waste                

E.G.: Gaskets, rube piping, silicone or fibres, plastic.

G. HYDRAULIC COMPONENTS

Piping, fittings, expansion vessel, valves. If there 

are any, to be disposed of separately based on the 

material they are made of:

Copper

Brass

Stainless steel

Other materials

Содержание CRISTAL 9





































Отзывы: