background image

15

CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9

c - Screw Loading

To select “Screw loading” (only when the boiler is switched off) act as follows:

•  Press the “menu” button.

•  Scroll to “Settings” using the arrows

•  Press “menu” to confirm.

•  Scroll to “Screw loading” using the arrows.

•  Press “menu” to confirm.

•  Select “Enabled” with the + - keys.

•  Press “menu” to confirm and “esc” to exit.

d - Tone

This function is disabled by default, so to enable act as follows:

•  Press the “menu” button.

•  Scroll to “Settings” using the arrows

•  Press “menu” to confirm.

•  Scroll to “Tone” using the arrows.

•  Press “menu” to confirm.

•  Select “On” with the + - keys.

•  Press “menu” to confirm and “esc” to exit.

e - Ext.Thermostat (see relative chapter)

f - Auto-Eco activation

To select the Auto-Eco function act as follows:

•  Press the “menu” button.

•  Scroll to “Settings” using the arrows

•  Press “menu” to confirm.

•  Scroll to “Auto-Eco activation" using the arrows.

•  Press “menu” to confirm.

•  Select “On” with the + - keys.

•  Press “menu” to confirm and “esc” to exit.

g - Off Time Eco

To select the Off Time Eco function act as follows:

•  Press the “menu” button.

•  Scroll to “Settings” using the arrows

•  Press “menu” to confirm.

•  Scroll to “Off Time Eco” using the arrows.

•  Press “menu” to confirm.

•  Enter the minutes with the + - keys.

•  Press “menu” to confirm and “esc” to exit.

x - Easy Set

To select the "Easy Set" function act as follows:

•  Press the “menu” button.

•  Scroll to “Settings” using the arrows

•  Press “menu” to confirm.

•  Scroll to "Easy Set"  using the arrows.

•  Press “menu” to confirm.

•  With the + - keys select "Easy Set" of interest (SET1 - SET2 - SET3 - SET4)

•  Press “menu” to confirm and “esc” to exit.

h - Pellet Recipe

To change the recipe act as follows:

•  Press the “menu” button.

•  Scroll to “Settings” using the arrows

•  Press “menu” to confirm.

•  Scroll to “Pellet Recipe” using the arrows.

Содержание CRISTAL 9





































Отзывы: