Cabletron Systems SSR-GLX19-02, Руководство пользователя

Страница: 362 / 495

Chapter 16: Configuring Routing Policies on the SSR
362 CoreWatch User’s Manual
16. If you wish, you can specify a level of preference for the filter network by entering any
numerical value in the
Preference
box.
17. If you wish to specify additional filter networks, be sure to activate the Add more filters
option, click Next , and repeat step 14 through step 16 . Otherwise, click Finish .
Modifying Summarize Routes
You can modify summarize routes to change their IP address and/or network
specifications.
To modify an existing summarize route:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file’s
Routing Configuration object.
3. Double-click the IP Routing Configuration object.
4. Double-click the IP Unicast Routing object.
5. Double-click the Routing Policy Configuration object.
6. Double-click the Summarize Routes object.
7. If you wish to modify the route definition for a particular summarize route, select the
IP address for that route from the list of existing summarize routes and modify the
attributes of the route definition by editing the fields of the
Summarized Route
Definition dialog box that appears and click OK .
This dialog box includes some of the same fields you specified when configuring the
summarize route. For more information on these fields, see
“Summarize Routes” on
page 358 .
8. If you wish to modify the filter network for a particular summarize route, go through
the following procedure:
a. Double-click the IP address for that summarize route. Once the list of existing
source protocol types for this IP address is displayed, double-click the source
protocol type you wish to modify.
b. Select the IP address for the filter network you wish to modify from the list of
existing filter networks.
c. Modify the attributes of the filter network by editing the fields of the Filter
Network Specification dialog box that appears.
This dialog box includes some of the same fields you specified when configuring
the summarize route. For more information on these fields, see
“Summarize
Routes” on page 358 .