Cabletron Systems SSR-GLX19-02, Руководство пользователя

Страница: 237 / 495

CoreWatch User’s Manual 237
Chapter 13: Configuring Security on the SSR
8. Specify the forwarding behavior of the static entry by doing one of the following:
– Select ALLOW to allow packets to go to a specific set of ports.
– Select DISALLOW to prohibit packets from going to a specific set of ports.
– Select FORCE to force packets to go to a specific set of ports. The SSR will force the
packets despite of any port locks in effect on the specified ports. Do not select this
option if you are defining a source entry.
You will define the set of ports to which you are allowing, disallowing, or forcing
packets later in the wizard.
9. Specify the source MAC address, destination MAC address, and VLAN ID in the
appropriate text boxes.
Use the source MAC address for source or flow entries. Use the Destination MAC
Address for destination or flow static entries.
10. Click Next . In the Bind to Port panel that appears, specify to which ports you want to
apply the filter.
Figure 156. Bound Port List panel (static-entry filter)
To apply the filter to a port, double-click that port’s module in the Available Port list,
select the port from the port list that appears, and click the Add button.
Clicking a module rather than double-clicking it selects all of that module’s ports. This
is a quick way to apply the filter to all of a module’s ports.
If you accidentally add a wrong port, remove it by selecting it in the Selected Port list
box and clicking the Remove button.