Cabletron Systems SSR-ATM29-02, Руководство пользователя, Страница: 46 / 386

Chapter 4: Learning Configuration Expert Basics
46 CoreWatch User’s Manual
servers, and configure the SSR for SNMP traps. For details on performing these tasks,
see
Chapter 5: “Changing System Settings” on page 49 .
2. Configure bridging on the SSR as discussed in Chapter 6: “Configuring SSR Bridging”
on page 63 .
3. Group physical ports on the SSR by configuring VLANs as discussed in Chapter 7:
“Configuring VLANs on the SSR” on page 81 .
4. If you are using the SSR in an IP environment, create IP interfaces and then configure
those interfaces for unicast or multicast routing.
For details on IP interfaces, see Chapter 8: “Configuring IP Interfaces for the SSR” on
page 101 . For details on unicast routing, see Chapter 9: “Configuring Unicast Routing
on the SSR” on page 119 . For details on multicast routing, see Chapter 10: “Configuring
Multicast Routing on the SSR” on page 135 .
5. If you are using the SSR in an IPX environment, configure IPX interfaces as discussed
in
Chapter 11: “Configuring the SSR for IPX Routes” on page 147 .
6. If you want to control traffic on the SSR, configure the SSR’s QoS policies as discussed
in
Chapter 12: “Configuring QoS on the SSR” on page 167 .
7. If you want to set security on the SSR, define ACLs and Layer-2 security filters as
discussed in
Chapter 13: “Configuring Security on the SSR” on page 195 .
Committing Your Configuration Changes
When you finish working in a wizard or dialog box, Configuration Expert temporarily
saves the changes you have made. To apply your changes, however, you will need to
commit them to a configuration file. You can commit your changes to the Active
Configuration file, the Startup Configuration file, both of those files, or a Custom
Configuration file.
To commit your configuration changes:
1. Click the Commit button in the Configuration Expert toolbar.
A Commit Configuration form similar to the following appears. The configuration file
in which you made your changes is listed in the From Configuration list box.