manualshive.com logo in svg

Cabletron Systems SSR-ATM29-02, Руководство пользователя, Страница: 132 / 386

Поделиться
Скачать
Cabletron Systems SSR-ATM29-02 Скачать руководство пользователя страница 132

Chapter 9: Configuring Unicast Routing on the SSR

132

CoreWatch User’s Guide

Configuration Expert adds the interfaces on which RIP is enabled to the list of 
interfaces found in the RIP Enabled IP Interfaces object. Deleting the interface from that 
object will disable RIP on the interface, but the interface will still be configured for IP 
and available as an IP interface. 

Adding Trusted Gateways

A trusted gateway is a router that is trusted to supply routing information. By default, all 
routers on a subnet are trusted to supply routing information. If trusted gateways are 
specified, only updates from those gateways are accepted. Add trusted gateways if you 
want the SSR to accept RIP updates from only specific sources. 

To add trusted gateways:

1.

Start Configuration Expert if you have not already done so. 

2.

Open the configuration file you want to modify and then double-click that file’s 
Routing Configuration object.

3.

Double-click the IP Routing Configuration object.

4.

Double-click the IP Unicast Routing object and then double-click the RIP Routing 
object. Double-click the RIP Trusted Gateways object. 

5.

Click the Configure New RIP Trusted Gateway object.

6.

In the RIP Trusted Gateway dialog box that appears, enter the IP address or host name 
of a source from which you want the SSR to accept RIP updates.

7.

Click OK.

Configuration Expert adds the trusted gateway to the list of those found in the RIP 
Trusted Gateways object. The SSR will accept RIP updates only from the sources you 
include in this list.

8.

Repeat 

step 5

 through 

step 7

 until you create the desired list of trusted gateways.

Adding Source Gateways

Add source gateways if you want to add routers that send RIP updates directly rather 
than using broadcast or multicast messages. Updates to source gateways are not affected 
by the setting of the interface RIP Packet Transmission option discussed on page page  - 
131. To add source gateways:

1.

Start Configuration Expert if you have not already done so. 

2.

Open the configuration file you want to modify and then double-click that file’s 
Routing Configuration object.

3.

Double-click the IP Routing Configuration object.

Содержание SSR-ATM29-02



































































































































































































































































































































































































Отзывы:

Нет отзывов