Cabletron Systems SSR-ATM29-02, Руководство пользователя, Страница: 208 / 386

Chapter 13: Configuring Security on the SSR
208 CoreWatch User’s Guide
10. Define the rule’s criteria by specifying values for the fields described in the following
table:
11. Do one of the following:
– If you have defined all of the rules for the ACL, click Finish.
– If you want to define additional rules, select the Add More Rules check box and click
Next
.
12. If you selected the Add More Rules check box, define another rule in the IPX RIP ACL
Rule panel that appears. To do so repeat step 10 and step 11 until you define all the
desired rules for the ACL.
After you finish defining all of an ACL’s rules, Configuration Expert adds the ACL to the
IPX RIP ACLs object. Configuration Expert also adds a separate object for each rule and
places this list of rules in the ACL object.
The rule numbers displayed in an ACL’s list of rules, are automatically assigned by
Configuration Expert. A rule’s number is included in the Rule # box of the IPX ACL Rule
panel when you are defining that rule.
Table 27. IPX RIP ACL Rule Criteria Fields
Field Description
Source Network Enter the source’s network address. You can enter ANY to
specify a wildcard (“don’t care”) condition. If you enter ANY,
the SSR uses the value 0 for the source network address and
FFFFFFFF
for the destination network address.
Destination Network Enter the destination’s network address.
Specifying this field is optional. If you do not enter a network
address, the value that the SSR assumes depends on whether
you entered ANY for the source’s network address.
• If you do not enter a value in this field and you entered
ANY for the source’s network address, the SSR sets the
destination network address to FFFFFFFF.
• If you do not enter a value in this field and did not enter
ANY for the source’s network address, the SSR sets
destination network address to the same value you
specified for the source’s network address.