USING BRIDGE MANAGEMENT OPTIONS
5-50
1. Use the arrow keys to highlight the Bridge Hello Time field.
2. Enter the new time at this field, in seconds. A time of 1 to 10 seconds
is allowed.
3. Press Return.
Changing Bridge Priority
If you want to change the part of the bridge address that contains the
identifier used in the Spanning Tree Algorithm for priority comparisons:
1. Use the arrow keys to highlight the Bridge Priority field (allowed
range is 0 - FFFF).
2. Enter the new identifier, in hex, at this field.
3. Press Return.
Saving Your Changes
After you have entered all necessary changes at the appropriate fields:
1. Highlight the SAVE option at the bottom of the screen.
2. Press Return to record the changes.
5.5.2
The Port Parameters Option
The Port Parameters option allows you to display bridge port information
and protocol parameters similar to the information provided at the Bridge
Parameters Screen for the Bridge. To access the Port Parameters option:
1. Highlight the PORT PARAMETERS option at the bottom of the
screen.
2. Press Return. The Bridge Port Parameters Screen, Figure 5-20, will
appear.
Содержание NB30
