background image

USING BRIDGE MANAGEMENT OPTIONS

5-42

13. Enter the Data field that you want to use as the filter, and press 

Return. Be sure that any unused characters are filled with Xs, which 
represent any number.

14. After you have filled in the specific field or fields that you want to use 

as a filter, highlight the SAVE FILTER command at the bottom of the 
screen.

15. Press Return.

Your filter has been enabled and entered in the Special Database. Packets 
with the specific Destination and Source Addresses, and Type and Data 
fields entering the bridge through the Ethernet Ports will be filtered or 
relayed.

5.4.2.3

Deleting Special Database Filters

To delete a Special Database filter:

1. Using the arrow keys, highlight the number (#) of the filter you wish 

to delete.

2. Press Return. The Special Database - Delete Filter screen, Figure 

5-18, will appear, with the filter you have chosen to delete in the lower 
half of the screen.

3. Highlight the DELETE FILTER command at the bottom of the 

screen.

4. Press Return. The filter has been deleted. Highlight the RETURN 

command at the bottom of the screen to return to the Special Database 
- Add Filter screen.

Содержание NB30

























































































Отзывы: