Cabletron Systems NB30 Скачать руководство пользователя страница 49

Страница: 49 / 88

USING BRIDGE MANAGEMENT OPTIONS

5-19

DSX-1 Port Setup Fields

DSX-1 Channel Assignment

Allows you to enable or disable any combination of the 24 channels on
the T1 connection to the NB30. To do so:

NOTE: When you assign channels on a T1 link, you must set the channels
on both NB30's of a pair to the same settings.

1. Use the Up and Down arrow keys to highlight the desired channel

number.

2. Press Return to toggle the channel between the Enabled or Disabled

condition.

3. Once you have specified the status of each channel, use the arrow keys

to highlight the EXECUTE command at the bottom of the window.

4. Press Return. The channels will be enabled or disabled as desired.

The Activate All Command

This command enables all channels on the T1 link. To do so:

1. Use the Arrow keys to highlight the ACTIVATE ALL command.

2. Press Return. All channels on the T1 link will be enabled, and will

display as such in the DSX-1 Channel Assignment field.

The Deactivate All Command

This command disables all channels on the T1 link. To do so:

1. Use the Arrow keys to highlight the DEACTIVATE ALL command.

2. Press Return. All channels on the T1 link will be disabled, and will

display as such in the DSX-1 Channel Assignment field.

Содержание NB30

























































































Результаты поиска

Содержание NB30

Отзывы:

Похожие инструкции для NB30

Бренды по названию

Популярные бренды

Cabletron Systems NB30, Руководство пользователя

Результаты поиска

Содержание NB30

Отзывы:

Похожие инструкции для NB30

Бренды по названию

Популярные бренды