Cabletron Systems NB30 Скачать руководство пользователя страница 51

Страница: 51 / 88

USING BRIDGE MANAGEMENT OPTIONS

5-21

Loop Status

Shows the current condition of the DSX-1 port. The current status
conditions are:

•

Not in Loopback - The DSX-1 port is currently not performing a
loopback test and is in normal operating condition.

•

Remote Loopback in Progress - A loopback test is currently in
progress.

•

Network Looped Back - Indicates that the Remote port is currently
looped toward the T1 link.

•

Rem Loopback Passed - Indicates that the Remote Loopback test
passed.

•

Rem Loopback Failed - Indicates that the Remote Loopback test
failed.

Test Pattern

Allows the user to select the pattern to use for the loopback test. The
available test patterns are:

•

All 0s.

•

All 1s.

•

Alternate 1/0s.

•

Incrementing Data.

5.2

THE SAVE NAMES OPTION

You can change the bridge location, network, and the bridge or port
user-defined names at the Bridge Information Screen, Figure 5-1.

To access the Bridge Information Screen (if you are not currently at this
location):

1. Highlight the RETURN option at the bottom of your present screen.

Содержание NB30

























































































Результаты поиска

Содержание NB30

Отзывы:

Похожие инструкции для NB30

Бренды по названию

Популярные бренды

Cabletron Systems NB30, Руководство пользователя

Результаты поиска

Содержание NB30

Отзывы:

Похожие инструкции для NB30

Бренды по названию

Популярные бренды