Cabletron Systems FN100, Справочное руководство

Страница: 66 / 110

Chapter 5: PPP MIB
Page 5-10 Fast Network 100 MIB Reference Guide
pppIpRemoteMaxSlotId {pppIpEntry 4}
Integer Read-Only
The Max-Slot-Id parameter that the remote node has advertised and that is in use
on the link. If vj-tcp header compression is not in use on the link then the value of
this object shall be 0. The value of this object is meaningful only when the link
has reached the open state (pppIpOperStatus is opened).
pppIpLocalMaxSlotId {pppIpEntry 5}
Integer Read-Only
The Max-Slot-Id parameter that the local node has advertised and that is in use on
the link. If vj-tcp header compression is not in use on the link then the value of
this object shall be 0. The value of this object is meaningful only when the link
has reached the open state (pppIpOperStatus is opened).
pppIpConfigTable {pppIp 2}
Not-Accessible
Table containing configuration variables for the IPCP for the local PPP entity.
pppIpConfigEntry {pppIpConfigTable 1}
Not-Accessible
IPCP information for a particular PPP link.
pppIpConfigAdminStatus {pppIpConfigEntry 1}
Integer Read-Write
The immediate desired status of the IP network protocol. Setting this object to
open (1) will inject an administrative open event into the IP network protocol’s
finite state machine. Setting this object to close (2) will inject an administrative
close event into the IP network protocol’s finite state machine. The FN100 only
supports Open 1).
pppIpConfigCompression {pppIpConfigEntry 2}
Integer Read-Write
If none (1), then the local node will not attempt to negotiate any IP Compression
option. Otherwise, the local node will attempt to negotiate compression mode
indicated by the enumerated value. Changes to this object take effect when the
link is next restarted. The other option Van-Jacobsen TCP/IP header
compression (2), is not supported on the FN100.