Cabletron Systems FN100, Справочное руководство

Страница: 22 / 110

Chapter 2: TCP/IP MIB-II
Page 2-6 Fast Network 100 MIB Reference Guide
ifOutErrors {ifEntry 20}
Counter Read-Only
The number of packets that were to be transmitted out the port, but incurred
transmission hardware errors.
ifOutQLen {ifEntry 21}
Gauge Read-Only
The maximum length ever obtained by the port’s outbound packet queue (in
packets) is not available, so this value is always one.
ifSpecific {ifEntry 22}
Object Identifier Read-Only
The object identifier of the MIB for the type of port, i.e., one of the following:
{dot3} for Ethernet ports (dot3 is defined later, as {transmission 7}).
{ppp} for the UART (ppp is defined later, as {experimental 18}).
2.3 ADDRESS TRANSLATION GROUP
at {mib-2 3}
Not supported.
2.4 IP GROUP
ip {mib-2 4)
The TCP/IP IP Group parameters are described below.
ipForwarding {ip 1}
Integer Read-Write
Whether the FN100 is an IP router. This value is always host (2). Attempts to
write a different value to this field will not change its value, and “badValue”
GetResponse PDUs are returned for all such SetRequest PDUs.
ipDefaultTTL {ip 2}
Integer Read-Write
The value, in seconds, to insert into the Time-To-Live field of the IP header when
this FN100 creates IP datagrams.