Cabletron Systems FN100, Справочное руководство

Страница: 46 / 110

Chapter 4: Bridge MIB
Page 4-2 Fast Network 100 MIB Reference Guide
dot1dBaseType {dot1dBase 3}
Integer Read-Only
Indicates what type of bridging this bridge can perform. If a bridge is actually
performing a certain type of bridging this will be indicated by entries in the port
table for the given type.
The FN100 is always transparent-only (2).
dot1dBasePortTable {dot1dBase 4}
Not-Accessible
A table that contains generic information about every port that is associated with
this bridge. Transparent, source-route, and srt ports are included.
All FN100 Ethernet ports are included in this table, regardless of whether any
form of bridging is currently enabled for the ports.
dot1dBasePortEntry {dot1dBasePortTable 1}
Not-Accessible
A list of information for each port of the bridge.
dot1dBasePort {dot1dBasePortEntry 1}
Integer Read-Only
The port number of the port for which this entry contains bridge management
information.
Identical to dot1dBasePortIfIndex.
dot1dBasePortIfIndex {dot1dBasePortEntry 2}
Integer Read-Only
The value of the instance of the ifIndex object for the interface corresponding to
this port.
dot1dBasePortCircuit {dot1dBasePortEntry 3}
Object Identifier Read-Only
For a port that (potentially) has the same value of dot1dBasePortIfIndex as
another port on the same bridge, this object contains the name of an object
instance unique to this port. For example, in the case where multiple ports
correspond one-to-one with multiple X.25 virtual circuits, this value might
identify an (e.g., the first) object instance associated with the X.25 virtual circuit
corresponding to this port. For a port that has a unique value of
dot1dBasePortIfIndex, this object can have the value {0 0}.
Always {0 0}.