Cabletron Systems FN100, Справочное руководство

Страница: 78 / 110

Chapter 6: Cabletron MIB
Page 6-12 Fast Network 100 MIB Reference Guide
6.3.3 Administration Group
sfadmin {es-1fe 3}
This group contains the attributes for configuring the system level control of the
entire FN100 and the overall FN100 status.
sfadminFatalErr {sfadmin 1}
Octet String Read-Only
This is a 32 byte array which contains information about the cause of the
previous system reset. This will describe the circumstances which forced the
system software to perform a reboot. The values in the first byte have the
following meanings:
(0) Power failure
(1) Watchdog Timeout
(2) NMS Requested Shutdown; next three bytes are not applicable;
next four bytes contain the NMS’s IP address; remaining 24 bytes
are not applicable)
(3-255) Fatal Error
sfadminAnyPass {sfadmin 2}
Octet String Read-Write
The authentication password (0-24 bytes) which must match the community
name in an SNMP Get, Getnext, or Set PDU, in order for the operation to be
performed. A zero length password indicates that any community name is
acceptable.
sfadminGetPass {sfadmin 3}
Octet String Read-Write
The authentication password (0-24 bytes) which must match the community
name in an SNMP Get or Getnext PDU (except for debug or password
parameters). A zero length password indicates that any community name is
acceptable. Alternatively, it is acceptable if the community name matches
sfsdminAnyPass, defined above.
2
2.
Certain SetRequest PDUs are used for read operations and using
sfadminGetPass for the community name is sufficient. Those special conditions
consist of SetRequest PDUs for sfaddrOperation (for read-random, read-next,
and read-block only), and for all MIB variables in the sfaddr group described as
Write-Ignore.