Cabletron Systems FN100, Справочное руководство

Страница: 81 / 110

Es-1fe Group
Fast Network 100 MIB Reference Guide Page 6-15
sfadminRebootConfig {sfadmin 18}
Integer Read-Write
The configuration file that will be used when the FN100 reboots. This parameter
is normally automatically set by the FN100; however, an NMS may explicitly set
it to either no-change (1) or revert-to-defaults (3). The possible values include:
no-change (1) the FN100 will not change its configuration
parameters when it reboots
revert-to-defaults (3) the FN100 will revert to its factory specified
defaults when it reboots
sfadminTempOK {sfadmin 19}
Integer Read-Only
The temperature condition of the module. Values include:
temperature-normal (1)
temperature-too-hot (2)
sfadminDisableButton {sfadmin 20}
Integer Read-Write
An integer that can be set to prevent the push button on the front of the FN100
from controlling the LED display. Values include:
true (1)
false (2)
sfadminButtonSelection {sfadmin 21}
Integer Read-Write
An integer that indicates which statistic has been selected. Values include:
led-any activity (1)
led-rx-activity (2)
led-tx-activity (3)
led-any-collision (4)
led-programmed (5)
led-speed (6)