Cablescan 512, Инструкция по эксплуатации

Страница: 40 / 95

Model 512 Instruction Manual Page 31
PRINT-RELATED COMMANDS
The following list contains all print-related commands. The printout also will appear on the
monitor during printing, or the monitor only if no printer is connected. Verify the Printer power
switch is on and the Printer Select light is on. At the system prompt, enter the two- letter
command, followed by an ENTER.
Tester
Function
2-letter
Command
Command
Description
Print Error PE P rint E rrors
Print Wire List PW
P rint W ire List
Print User List PU P rint U ser List
- PS P rint S orted
- PO P rint O ptions
- P P rinter on/off toggle
- FF
F orm F eed
- LF L ine F eed
- SH
S et H eading
Print Wire List - PW
Same as PRINT WIRE LIST selected from the Front Panel menu. See section on Controls and
Displays for more details.
Print Error List - PE
Same as ERROR LIST key on the Front Panel. See section on Controls and Displays for more
details.
Print User Notation List - PU
Prints a list of user notations that have been assigned to the scanner test points.
Print Sorted Wire List - PS
Prints a wire list of all continuity assignments in memory. This list is sorted from the sequential
wire list and is stored in ascending order for use during shorts test. The printout is therefore
listed in ascending order, with multiple circuits grouped together.