Cablescan 512, Инструкция по эксплуатации

Страница: 39 / 95

Model 512 Instruction Manual Page 30
BUILD COMMANDS
The following commands relate to using the assembly features of the Model 512. These modes
use Body Conductance to locate desired wires for assembly. At the system prompt, enter the
two-letter command, followed by an ENTER.
Tester
Function
2-letter
Command
Command
Description
Random Build RA
R andom A ssembly
Sequential Build SQ S e q uential Assembly
Search SB
S can B ody
Random Build - RA
Same as RANDOM BUILD on the Front Panel. See section on Controls and Displays for more
details.
Sequential Build - SQ
Same as SEQ BUILD on Front Panel. See section on Controls and Displays for more details.
Execution of this command begins at the first sequence step programmed into the wire list table.
Entering a Sequence Number
To start the Sequential Build at a step other than the first, enter the SQ command followed with a
SPACE, then enter the sequence number followed by ENTER.
Search - SB
Same as SEARCH selected from the Front Panel menu. See section on Controls and Displays
for more details.