25
ITALIANO
Nota: quando il voltaggio delle batterie è basso, lo
schermo LCD mostra il simbolo “
“ e l’indicatore
delle batterie rimane acceso, ad indicare che vanno
sostituite.
3.1 CAMBIO TRA °F E °C
Nel comparto batterie, premere il pul-
sante °F/°C per cambiare tra i gradi
Fahrenheit (°F) e Celsius (°C).
3.2 FUNZIONE DI MEMORIA
In modalità OFF/ quando il prodotto è spento, pre-
mere il pulsante “ ” per 1 secondo. Il prodotto può
effettuare e memorizzare fino a 30 misurazioni in
ordine (vedi figure seguenti).
Il prodotto si spegne automaticamente dopo un
periodo di inutilizzo di 30 secondi o manualmente
premendo il pulsante ACCENDI/SPEGNI.
Attenzione: il termometro memorizza solo misura-
zioni di temperatura corporea, non di oggetti.
3.3 SCHERMO
1. Premere il pulsante d’accensione per attivare il
prodotto e iniziare la misurazio-
ne frontale della temperatura.
2. Puntare il sensore al centro
della fronte ad una distanza
≤
ai 3cm.
3. Premere il pulsante per ese-
guire la misurazione istantanea.
Attenzione: se la distanza è su-
periore ai 3 cm, il prodotto non misura la tempera-
tura e sullo schermo appare un messaggio di errore
lampeggiante e che invita ad avvi-
cinare (progressivamente) il termo-
metro. Portare quindi il termometro
alla giusta distanza e la misurazione
sarà completata.
A misurazione effettuata, viene
emesso un segnale d’avviso ed il
risultato della misurazione compare sullo schermo.
Attenzione: Le misurazioni continue non possono
essere effettuate a intervalli inferiori ai 5 secondi.
Содержание T-PLUS
Страница 2: ......