BYOC Overdrive 2 Скачать руководство пользователя страница 1

Страница: 1 / 37

Build Your Own Clone

Overdrive 2 Kit Instructions

Warranty:

BYOC, LLC guarantees that your kit will be complete and that all parts and components

will arrive as described, functioning and free of defect. Soldering, clipping, cutting,

stripping, or using any of the components in any way voids this guarantee. BYOC, LLC

guarantees that the instructions for your kit will be free of any majors errors that would

cause you to permanently damage any components in your kit, but does not guarantee

that the instructions will be free of typos or minor errors. BYOC, LLC does not

warranty the completed pedal as a whole functioning unit nor do we warranty any of the

individual parts once they have been used. If you have a component that is used, but

feel it was defective prior to you using it, we reserve the right to determine whether or

not the component was faulty upon arrival. Please direct all warranty issues to:

[email protected] This would include any missing parts issues.

Return:

BYOC, LLC accepts returns and exchanges on all products for any reason, as long as

they are unused. We do not accept partial kit returns. Returns and exchanges are for the

full purchase price less the cost of shipping and/or any promotional pricing. Return

shipping is the customers responsiblity. This responsibility not only includes the cost of

shipping, but accountability of deliver as well. Please contact

[email protected] to receieve a return authorization before mailing.

Tech Support:

BYOC, LLC makes no promises or guarantees that you will sucessfully complete your kit

in a satisfactory mannor. Nor does BYOC, LLC promise or guarantee that you will

receive any technical support. Purchasing a product from BYOC, LLC does not entitle

you to any amount of technical support. BYOC, LLC does not promise or guarantee that
any technical support you may receive will be able to resolve any or all issues you may be

Содержание Overdrive 2





































Результаты поиска

Содержание Overdrive 2

Отзывы:

Похожие инструкции для Overdrive 2

Бренды по названию

Популярные бренды

BYOC Overdrive 2, Инструкции к набору

Результаты поиска

Содержание Overdrive 2

Отзывы:

Похожие инструкции для Overdrive 2

Бренды по названию

Популярные бренды