BYOC Overdrive 2, Инструкции к набору

Страница: 2 / 37

experiencing.
That being said, we will do our best to help you as much as we can. Our philosophy at
BYOC is that we will help you only as much as you are willing to help yourself. We have
a wonderful and friendly DIY discussion forum with an entire section devoted to the
technical support and modifications of BYOC kits.
www.buildyourownclone.com/board
When posting a tech support thread on the BYOC forum, please post it in the correct
lounge, and please title your thread appropriately. If everyone titles their threads
HELP! , then it makes it impossible for the people who are helping you to keep track of
your progress. A very brief discription of your specific problem will do. It will also make
it easier to see if someone else is having or has had the same problem as you. The
question you are about to ask may already be answered. Here are a list of things that you
should include in the body of your tech support thread:
1. A detailed explanation of what the problem is. (not just, It doesn t work, help )
2. Pic of the top side of your PCB.
3. Pic of the underside of your PCB.
4. Pic that clearly shows your footswitch/jack wiring and the wires going to the PCB
5. A pic that clearly shows your wiring going from the PCB to the pots and any other
switches(only if your kit has non-PC mounted pots and switches)
6. Is bypass working?
7. Does the LED come on?
8. If you answer yes to 6 and 7, what does the pedal do when it is "on"?
9. Battery or adapter.(if battery, is it good? If adapter, what type?)
Also, please only post pics that are in focus. You're only wasting both parties' time if you
post out of focus, low res pics from your cell phone.
Revision Notes:
Rev 1.0 There is a trace touching one of the eyelets for the mids toggle switch.
Rev 1.1 (released 2/5/09) Fixed the trace error.
Copyrights:
All material in this document is copyrighted 2009 by BYOC, LLC