Parts Checklist for BYOC ESV 2-Knob Bender Kit
Resistors:
1 - 470ohm (yellow/purple/brown/gold)
1 - 4.7k (yellow/purple/red/gold)
1 - 10k (brown/black/orange/gold)
1 - 47k (yellow/purple/orange/gold)
2 - 100k (brown/black/yellow/gold)
1 - 1M (brown/black/green/brown)
Capacitors
:
2 - .01uf film
1 - .1uf film
2 - 4.7uf aluminum electrolytic
1 - 47uf aluminum electrolytic
Diodes:
1 - 1N4001
Transistors:
3 - OC75 germnium transistors
3 - transistor sockets
Potentiometers: Be sure to snap off the small tab on the side of each pot.
1 - A100k log (level)
1 - B1k linear (attack)
Hardware
:
1 - drilled enclosure w/ 4 screws
1 - byoc 2-knob bender kit circuit board
1 - 3pdt footswitch
2 - standoffs (only in kits with solder lugged pots)
2 - knobs
1 - AC adaptor jack
1 - ¼ stereo jack
1 - ¼ mono jack
1 - battery snap
1 - red LED
hook-up wire
