PROTECTION & SAFETY
23
2021/07 - Version: C - Code : 34681
3.2.
Trapezoidal wall
In the event that your pit wall includes a lower trapezoidal section, assemble it as follows:
- Slide the various panels together.
- Fasten the finishing trim to the pit wall using Aluminium rivets.
- Slide the trapezoidal section onto the straight section.
Lay the assembled pit wall flat on the ground, pool side
(smooth side) down.
Position the flat bars so that they straddle the straight
section and the trapezoidal section at locations that
divide the pit wall into roughly 3 equal sections.
Adjust the height of the flat bars such that the holes do
not coincide with a groove or join between the panels.
Counter drill the panels through the holes in the flat bars
and rivet together.
4.
Putting the separating pit wall in position
Slide the pit wall assembly (4) into the vertical profiles.
Fasten the pit wall to the lateral flanges using screens, M10 x60 nylon (3),
washers M10, Nylon (2) and nuts M10 Nylon (1).
