PROTECTION & SAFETY
46
2021/07 - Version: C - Code : 34681
GENERAL GUARANTEE CONDITIONS
You have just purchased a BWT automatic cover, we would like to thank you for placing your trust in us.
By choosing this cover, you judiciously selected a cutting-edge product perfectly adapted to its function as a
pool safety cover.
This automatic cover was designed and manufactured in accordance with the stipulations of the French
standards in effect and notably the standard NF P90-308 “Protective elements for in-ground, barrier-free, private
or collective use swimming pools – Safety covers and securing devices – Safety requirements and test
methods”*
*Unless otherwise stipulated in the technical specifications of some models.
Guarantees offered on BWT automatic covers are genuine.
They derive from the commitment of Procopi BWT Groupe, designer and manufacturer, whose registered office
is situate:
Zone d’activités
Les Landes d’Apigné
35650 - LE RHEU, FRANCE
IMPORTANT NOTICE:
‐
The guarantees set out in the following are extended to professional clients only. End users of the pool
may under no circumstances make any claim under this guarantee, as they do not enjoy any contractual
relationship with Procopi BWT Groupe.
‐
Hence Procopi BWT Groupe and its installer client hereby mutually recognise each other’s status as
"professionals". Notwithstanding, coverage under these guarantees assumes that the professional client
provided its own customer with the “Operating instructions” describing the correct use and maintenance
of a BWT automatic cover, and ensured that their customer signed said document.
‐
All the guarantees described in this document enter into effect on the date of reception of the guarantee
slip appended to this document, duly filled out by the installer client, or failing this, after a period of
30 days following the date of delivery of the cover.
1.
Guarantee on the slat apron (PVC, PC)
1.1.
Guarantee covering slat leak tightness and structural integrity
The slats constituting the BWT cover apron are covered by a 5-year guarantee concerning the leaktightness of
the slats, their articulation and their structural integrity over time.
In the event of the partial replacement of the slats constituting a BWT cover, and given the natural, gradual
discolouration of said and colour variations from one batch of materials to another, variations in colour between
the old slats and the new slats are normal and natural.
The following are outside the scope of this guarantee:
Any damage resulting from the failure to respect the instructions set out in the engineering diagrams or in the
cover component installation manual.
Slat aprons comprised of translucent blue slats installed on cover models that do not feature housing to protect
the cover when rolled up around its axle (Aquadeck, Evodeck, P-HS-E).
Slat covers comprised of polycarbonate slats (PC) installed on cover models that feature above-ground cover
storage.
Defects implicating slat leaktightness, in as far as the number of slats concerned does not constitute more than
2 % of the total number of slats comprising the BWT cover slat apron surface area.
The presence of drops of condensation inside the slats, which are not due to a leaktightness defect but rather
to the material’s natural permeability to steam.
