EN
Page 48 of 96
INSTRUCTION, USE AND
MAINTENANCE MANUAL
14.0 WHEEL BALANCING
14.1 Switching the machine on and off
Press the "ON" switch (
Fig. 27 ref. 1
), located in the
rear part of the equipment.
IN THE CASE OF PNEUMATIC
MODELS, ON STARTING UP, THE
PNEUMATIC CHUCK IS ALWAYS
OPENED. ALWAYS KEEP YOUR
HANDS AND OTHER PARTS OF
THE BODY AWAY FROM THE MOV-
ING CHUCK.
ALSO TAKE CARE IF A WHEEL IS
ALREADY FITTED ON THE CHUCK,
AS THIS COULD BE FORCED OFF
THE SHAFT DURING THE OPEN-
ING OF THE CHUCK ITSELF.
Wait a few seconds up to the complete loading of the op-
erational program. The equipment is ready to operate
when the main screen "Home" appears on the monitor.
Fig. 40
1
2
3
4
5
A B C
KEY
A – Displaying operations/information area
B – Colours for identification of the buttons to be
used
C – Function icons
1 – Programs and measurements acquisition but-
tons
2 – Wheel spin push button
3 – Go to next page
4 – Pneumatic chuck opening/closing (on models
with pneumatic chuck only) (generally to be
used in case of emergency)
5 – User management (if enabled) (user manage-
ment is not enabled on machine delivery)
At the bottom of the main screen page and of each
screen page described below, there will be coloured
rectangles (
Fig. 40 ref. B
) located above function
identification icons (
Fig. 40 ref. C
). These functions
are activated by pressing the appropriate coloured but-
ton on the push-button panel (
Fig. 39 ref. 9
). Press
the button (
Fig. 40 ref. 3
) to display a second page
where you can access the "Technical assistance" menu
and the "Run-out" menu (see
Fig. 41
).
Fig. 41
1
2
3
4
KEY
1 – User menu
2 – Run-out menu (visible only if active)
3 – Return to previous page
4 – Measurement unit setting.
The machine is supplied with “grams” option
enabled (see Chap. 15.0), so weights will
be displayed only in grams and no icons will be
displayed onto push button 4.
In order to modify the measurement unit carry
out the following procedure: if “ounce” option
is activated from user menu (see Chap.
15.0), “ounce” weight displaying mode is set,
and push button
will be displayed. Press
the button
to set machine weight display
in grams and on the screen will be displayed
icon
. Press the button
to set ma-
chine weight display in ounces and on the screen
will be displayed icon
.
1301-M001-02
LIBRAK360S - LIBRAK360PS - LIBRAK360WS - LIBRAK360PWS - LIBRAK360WSON - LIBRAK360PWSON - LIBRAK360PWSPRO - LIBRAK360PWS-MC - LIBRAK360PWS-OPEL
