INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
Page 17 of 96
3. Tighten tyre inner rod (
Fig.
_
7 ref. 1
) with flange in-
ner rod (
Fig.
_
7 ref. 2
) by using the wrench provided
(
Fig.
_
7 ref. 3
) and a 12 mm wrench (
Fig.
_
7 ref.
4
). Use also a torque spanner (
Fig.
_
7 ref. 5
) (not
supplied) on one of the 2 openings on the provided
spanner (
Fig.
_
7 ref. 3
).
Fig. 7
4. Lock the chuck by pressing the brake and turn the
pneumatic shaft screw (
Fig.
_
8 ref. 1
) onto the flange
(
Fig.
_
8 ref. 2
) until it stops.
Fig. 8
5. Tighten with the wrench provided (
Fig.
_
8 ref. 3
).
REMOVAL
1. Open the pneumatic chuck by means of the pedal
provided and make sure the outer ball (
Fig.
_
9 ref.
1
) is in the position indicated in
Fig.
_
9
.
Fig. 9
2. Lock the chuck by pressing the brake and unlock the
pneumatic shaft (
Fig.
_
10 ref. 1
) using the wrench
provided (
Fig.
_
10 ref. 2
).
Fig. 10
1301-M001-02
LIBRAK360S - LIBRAK360PS - LIBRAK360WS - LIBRAK360PWS - LIBRAK360WSON - LIBRAK360PWSON - LIBRAK360PWSPRO - LIBRAK360PWS-MC - LIBRAK360PWS-OPEL
