INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 11 of 43
8.0 WORKING ENVIRONMENT CONDI-
TIONS
The machine must be operated under proper condi-
tions as follows:
• temperature: 0° + 55° C
• relative humidity: 30 - 95% (dew-free)
• atmospheric pressure: 860 - 1060 hPa (mbar).
The use of the machine in ambient conditions other
than those specified above is only allowed after prior
agreement with and approval of the manufacturer.
8.1
Working position
In
Figure 5
it's possible to define work positions
A
and
B
which will be referred to during the description of
the machine operating phases.
Position
A
is the main position for wheel fitting and
removal with the mandrel, while position
B
is ideal to
follow tyre inflation operations.
Working in these positions allows better precision and
speed during operating phases as well as greater safety
for the operator.
8.2
Working area
Fig. 5
USE THE MACHINE IN A DRY AND AD-
EQUATELY LIT PLACE, POSSIBLY INDOORS
OR ANYWAY IN A ROOFED AREA, THIS PLACE
MUST BE IN COMPLIANCE WITH APPLICABLE
SAFETY REGULATIONS.
The location of the machine requires a usable space as
indicated in
Figure 5
. The positioning of the machine
must be according to the distances shown. From the
control position the operator is able to observe all
the machine and surrounding area. He must prevent
unauthorized personnel or objects that could be dan-
gerous from entering the area. The machine must be
fixed on a flat floor surface, preferably of cement or
tiled. Avoid yielding or irregular surfaces. The base
floor must be able to support the loads transmitted
during operation. This surface must have a capacity
load of at least 500 kg/m².
The depth of the solid floor must be sufficient to guar-
antee that the anchoring bolts hold.
8.3 Lighting
The machine does not require its own lighting for
normal working operations. However, it must be used
in an adequately lit environment.
In case of poor lighting use lamps having total power
of 800/1200 Watt.
7104-M009-2_B
AIKIDO.4 - AIKIDO.4FI
