Bush BR330DABC, Руководство пользователя

Страница: 6 / 38

C B A D 0 3 3 R B
6
Getting Started
Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
Main unit x 1
Remote control x 1and AAA alkaline batteries x 2
Power adapter x 1
DAB/FM antenna x 1
RCA cable x 1
Quick start guide x 1
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
Where the radio will be exposed to direct sunlight.
Where the radio will be close to heat radiating sources.
Where the humidity is high and ventilation is poor.
Where it is dusty.
Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Antenna
Unwind the DAB/FM antenna and insert it to Antenna socket on the rear of the unit to ensure you
receive the best reception possible in both DAB and FM radio modes. It may be necessary to adjust
the position of the radio and /or antenna to achieve the best signal.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the rear of the unit. Then
insert the power adapter into the mains socket. The unit will go to standby mode.
Press button on the unit or on the remote control to switch unit on.
Press button a second time on the unit or on the remote control to switch unit to standby.
To turn off unit completely, disconnect the power cord from the mains socket especially you attempt to
not use receiver for long periods of time.
Volume Control
Adjust the receiver volume by pressing VOLUME - and + buttons on the remote control to decrease
and increase volume.
Using the Optical Connection
Use an optical cable (not supplied) to connect Optical Out socket on the rear of unit to audio
system’s OPTICAL IN socket. You can enjoy music that transmits from your receiver to your existing
audio system.