Bush Hog HDTH5 Скачать руководство пользователя страница 95

Страница: 95 / 174

HDTH 5 & 6 Finish Mower 08/21

Assembly Section 3-3

ASSEMBLY

ASSEMBL

The HDTH models are shipped from the factory partially assembled on shipping stands allowing

the machine to be shipped in a vertical position. The shipping stands attached to the front of

the machines must be removed prior to the assembly process.

Do not attempt to remove the shipping stands with the machine in the vertical

position.

PREPARING TO ASSEMBLE

1. With the aid of a overhead winch or a fork lift, lower the cutter to the ground so that it is rest-

ing securely on a firm flat surface

2. Remove Shipping Stands

3. Remove the Driveshaft, Mast Halves and Mast Supports from the machine.

4. Remove the Bag of Parts from under the shielding.

5. Leave the Caster Wheels in the shipping position at this time.

Figure 3-1

HDTH

as shipped in

vertical position.

Mast Supports

Driveshaft Assembly

Mast Halves

Shipping Stand

Bag of parts Located
under shield

Caster Wheels

Содержание HDTH5















































































































































































Результаты поиска

Содержание HDTH5

Отзывы:

Бренды по названию

Популярные бренды

Bush Hog HDTH5, Руководство оператора

Результаты поиска

Содержание HDTH5

Отзывы:

Бренды по названию

Популярные бренды