manualshive.com logo in svg

Bush Hog HDTH5, Руководство оператора

Поделиться
Скачать
Bush Hog HDTH5 Скачать руководство пользователя страница 140

HDTH 5 & 6 Finish Mower  08/21

Maintenance Section 5-6

© 2021 Alamo Group Inc.

MAINTENANCE

MAINTENANCE

BLADE REMOVAL

Never work under the implement, or any lifted component unless the imple-
ment is securely supported or blocked to prevent sudden or inadvertant falling
which can cause serious injury or death.

The replacement of the blades must be done using maximum caution, and always with the tractor shut off and the dri-
veshaft disconnected from the tractor. Raise the mower body to the maximum height possible with the tractor power-
lift so as to allow you to work properly on the underneath part of the mower. 

1. Support the raised machine with suitable supports under the mower frame and support the raised machine with a

suitable over head hoist capable of supporting the implements weight.

2. Remove the Blade Bolt, Cup Washer, Blade and Blade Washer. 

(Figure 5-6)

BLADE INSTALLATION (Figure 5-6)

1. Place the cup washer on the blade bolt with the convex side to the blade bolt head.
2. With the blade cutting edge toward the ground and the offset up, place the blade bolt with the cup washer through

the blade.

3. Place the smooth side of the blade washer to the top of the blade inserting the blade bolt through the blade washer.
4. Start the blade bolt in the spindle aligning the blade washer with the spindle housing.
5. Torque the blade bolt to 75 ft./lbs.

Blade Washer

Blade 

Cup Washer 

Blade Bolt  

Bottom View

(Figure 5-6)

Содержание HDTH5















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды