manualshive.com logo in svg

Bush Hog HDTH5, Руководство оператора

Поделиться
Скачать
Bush Hog HDTH5 Скачать руководство пользователя страница 107

HDTH 5 & 6 Finish Mower  08/21

Operation Section 4-3

© 2021 Alamo Group Inc.

OPERATION

OPERA

TION

Tractor Requirements and Capabilities

• 

ASAE approved Roll-Over Protective Structure (ROPS) or ROPS cab and seat belt.

• 

Tractor Safety Devices ......................... Slow Moving Vehicle (SMV) emblem, lighting, PTO master shield

• Tractor 

Horsepower:

-Minimum ...................................15HP - HDTH5, 20HP - HDTH6
-Maximum.......... ........................35HP - HDTH5, 40HP - HDTH6

• Hitch 

-Lift 

Type 

Mower:

-Lifting Capacity .........................Lift - 650 lbs. - HDTH5

.........................Lift - 740 lbs. - HDTH6

• 

Front End Weight................................. As needed to maintain 20% weight on front axle

• 

Power Take Off.................................... 540 RPM, 6-spline 1-3/8” diameter output shaft

TRACTOR REQUIREMENTS

ROPS & Seat Belt

The tractor must be equipped with a Roll-Over-Protective-Structure (ROPS) (tractor cab or roll-bar) and seat
belt to protect the operator from falling off the tractor, especially during a roll over where the driver could be
crushed and killed. Only operate the tractor with the ROPS in the raised position and seat belt fastened.
Tractor models not equipped with a ROPS and seat belt should have these life saving features installed by an
authorized dealer.

OPS-U- 0003

Operate this Equipment only with a Tractor equipped with an approved

roll-over-protective system (ROPS). Always wear seat belts. Death or

serious injury can result from falling off the tractor and/or becoming 
pinned or trapped under the tractor or implement particularly during a
rollover accident.

Содержание HDTH5















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды