Bush Hog HDTH5, Руководство оператора

Страница: 88 / 174

HDTH 5 & 6 Finish Mower 08/21
Introduction Section 2-2
© 2021 Alamo Group Inc.
INTRODUCTION
INTRODUCTION
2-1 DESCRIPTION
The HDTH cutters (Figure 2-1) are grooming mowers intended for cutting lawns, golf courses, athletic fields, or any
maintained area where a clean, uniform finish is desired. Uplift blades form a suction during operation to lift the grass
before cutting it. The caster wheel arrangement along with the floating lift linkage and optional front roller, all work
together to give an even cut and minimize scalping.
Power from the tractor is transmitted through a telescoping driveline to the gearbox. It is then passed to the spindle
housings by a single, B-section, Aramid Cord reinforced belt. Drivetrain protection is provided by belt slippage.
Fig. 2-1
Description Model HDTH5 Model HDTH6
Cutting Width..................................................60”...................................................................72"
Cutting Height (1/2" incr.) ...............................1 1/2" - 6 1/2" .................................................1 1/2" - 6 1/2"
Tractor HP Range .........................................15-35 PTO ......................................................20-40 PTO
Hitch Type ......................................................Cat 1 Std. & QH ..............................................Cat 1 Std. & QH
Blade Size ......................................................1/4" x 2 1/2 x 21" ............................................1/4" x 2 1/2" x 25"
Number of Blades ..........................................3 ......................................................................3
Blade Tip Speed.............................................18,231 FPM ....................................................18,272 FPM
Blade Overlap ................................................1 1/2"...............................................................1 1/2"
Blade Uplift .....................................................Parallel ............................................................Parallel
Driveline Size .................................................ASAE Cat 3.....................................................ASAE Cat 3
Front Roller (optional) ....................................3" x 5"..............................................................3" x 5"
Discharge .......................................................Rear ................................................................Rear
Deck Thickness ..............................................7ga ..................................................................7ga
Tires (Selection) .............................................3 1/4 X 10 Solid...............................................3 1/4 X 10 Solid
4 x 10 1/2 Pneumatic ......................................4 x 10 1/2 Pneumatic
Belts ...............................................................(1) "B" Aramid Cord.........................................(1) "B" Aramid Cord
Belt Adjustment ..............................................Spring-Loaded Idler ........................................Spring-Loaded Idler
Gearbox .........................................................45 HP ..............................................................45 HP
Approx. Weight...............................................672 lbs. ...........................................................730 lbs.
EQUIPMENT SPECIFICATIONS
HDTH5 & HDTH6