Bush Hog HDTH5, Руководство оператора

Страница: 126 / 174

HDTH 5 & 6 Finish Mower 08/21
Operation Section 4-22
© 2021 Alamo Group Inc.
OPERATION
OPERA
TION
Shutting Down the Mower
To shut down the mower operation:
1. Bring the tractor to a complete stop on a level surface.
2. Decrease the engine speed (RPM) to idle.
3. Place the transmission in park or neutral and apply the parking brake.
4. Disengage the PTO and wait for the blades to stop turning. (Do Not Disengage the PTO at a High RPM unless it
is an emergency situation).
5. Lower the mower to the ground.
6. Shut down the tractor, remove key and wait for all motion to come to a complete stop before exiting tractor.
DISCONNECTING THE MOWER FROM THE TRACTOR
Always shut the Tractor completely down, place the transmission in park, and set the parking
brake before you or anyone else attempts to connect or disconnect the Implement and Tractor
hitches.
(S3PT-15)
Before disconnecting the mower, the PTO must be dis-
engaged and blade rotation at a complete stop. Move
the mower to a level storage location and lower it to the
ground. If the mower is not resting securely on the
ground, block the mower up securely before attempting
to disconnect it from the tractor. Use extreme care to
keep feet and hands from under the mower and clear
of any pinch points caused by the tractor hitch arms and
mower pins.
OPS-R-0030_F
Lift Mower-To disconnect the mower, first extend the tractor 3-point hitch top
link to remove tension on the top link hitch pin. When the pin is loose and
easy to rotate, remove the pin from the mower. Next remove both lower lift
arms.
After disconnecting the hitch points, remove the mower driveline from the
tractor PTO shaft. Lay the driveline down carefully to avoid damaging the dri-
veline or its shield. Do not let the driveline fall into mud or dirt, which can con-
taminate the bearing and shorten the life of the driveline. OPSR- 0031_E
Hitch
Pin
Lift
Arm
Lift
Arm
Tractor
Top
Link
Mower
Top
Link
(Figure 4-3)