manualshive.com logo in svg

Bush Hog HDTH5, Руководство оператора

Поделиться
Скачать
Bush Hog HDTH5 Скачать руководство пользователя страница 142

HDTH 5 & 6 Finish Mower  08/21

Maintenance Scetion 5-8

© 2021 Alamo Group Inc.

MAINTENANCE

MAINTENANCE

END of SEASON STORAGE

Your rotary cutter represents an investment from which you should get the greatest possible benefit. Therefore, when
the season is over, the cutter should be thoroughly checked and prepared for storage so that a minimum amount of
work will be required to put it back into operation for the next season. The following are suggested storage proce-
dures:

The following are suggested storage procedures:

1. Thoroughly clean all debris off the mower to prevent damage from rotting grass and standing water.

2. Lubricate all mower grease points and fill gearbox oil levels as detailed in the maintenance section.

3. Tighten all bolts and pins to the recommended torque.

4. Check the mower for worn and damaged parts. Perform repairs and make replacements immediately so that the

mower will be ready for use at the start of the next season.

5. Store the mower in a clean, dry place with the mower housing resting securely on blocks or at ground level.

6. Use the Driveline Storage hook to Keep the driveline yoke from sitting in water, dirt and other contaminants.

7. Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the mower

.  

Содержание HDTH5















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды