manualshive.com logo in svg

Bush Hog HDTH5, Руководство оператора

Поделиться
Скачать
Bush Hog HDTH5 Скачать руководство пользователя страница 131

TROUBLE SHOOTING GUIDE

Problem Possible 

Cause 

Remedy

STREAKING

Slow blade speed. 

Operate PTO at 540 RPM.

Worn blade tips. 

Replace with Genuine Bush Hog Blades.
See your Bush Hog Dealer.

Dull blades.

Sharpen blades uniformly.

Blades unable to cut that part of 

Slow ground speed of tractor but keep

grass pressed down by path of 

engine running at full PTO rpm.

tractor tires or casters. 

Cutting lower will help.

Mowing too fast. 

Slow down until cured.

Drive belt loose. 

Tighten per instructions.

Belt Glazed/Slipping 

Apply belt dressing or replace with
special Bush Hog belt.

Blade loose on spindle. 

Tighten blade bolt securely. 

Conditions too wet for mowing. 

Allow grass to dry before mowing.

MATERIAL DISCHARGES 

Material too high and too much 

Reduce ground speed but maintain
material 540 rpm at tractor PTO, or make 
two passes over material. Raise the
mower for the first pass and lower to
desired height for the second and cut
at 90 deg. to first pass. Raise rear of
mower high enough to permit material
to discharge, but not so high that
conditions listed above occur.

Belt Slipping 

Tighten or replace with special Bush Hog 
belt

Grass wet 

Allow grass to dry before mowing.
Slow ground speed of tractor but keep
engine running at full PTO rpm.
Cutting lower will help.

HEAVY VIBRATION 

Too high blade speed. 

Do not exceed 540 PTO rpm.

Broken/Bent Blade. 

Replace with genuine Bush Hog blades.
See your Bush Hog dealer.

Worn/Unbalanced Blade 

Grind uniformly or replace.

Bent/Broken sheave. 

Replace parts.

Trash hung on blade. 

Clean off blade.

BELT SLIPPING 

Belt loose. 

Replace with special Bush Hog belt.

Belt glazed. 

Use belt dressing or replace.

Oil on belt. 

Clean or replace.

STREAKING

Slow blade speed. 

Operate PTO at 540 RPM.

Worn blade tips. 

Replace with Genuine Bush Hog Blades.

Dull blades. 

Sharpen blades uniformly.

Blades unable to cut that part of 

Slow ground speed of tractor but keep

grass pressed down by path of

engine running at full PTO rpm.

tractor tires or casters. 

Cutting lower will help.

Mowing too fast. 

Slow down until cured.

Drive belt loose. 

Tighten per instructions.

Belt Glazed/Slipping 

Apply belt dressing or replace with belt.

Blade loose on spindle. 

Tighten blade bolt securely. (NOTE:

Conditions too wet for mowing.

Allow grass to dry before mowing.

HDTH 5 & 6 Finish Mower  08/21

Operation Section 4-27

© 2021 Alamo Group Inc.

OPERATION

OPERA

TION

Содержание HDTH5















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды