EU Declaration of Conformity | 14
Instruction Manual FOSSA FO 0015 A - FO 0035 B_EN_en
21 / 28
14 EU Declaration of Conformity
This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the
Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery
(this can be the operating company, too) must conduct the conformity assessment process for the superordinate
machine or plant, issue the Declaration of Conformity for it and affix the CE-marking.
The manufacturer
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
declares that the machine: FOSSA FO 0015 A; FOSSA FO 0035 B
fulfill(s) all the relevant provisions from EU directives:
– ‘Machinery’ 2006/42/EC
– ‘ATEX Directive’ 2014/34/EU, for use in potentially explosive areas according to classification written on the
machine nameplate
– ‘Electromagnetic Compatibility’ (EMS) 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equip-
ment (incl. all related applicable amendments)
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standards
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached
by the upper and lower limbs
EN 1012-1 : 2010
EN 1012-2 : 1996 + A1 : 2009
Compressors and vacuum pumps - Safety requirements - Part 1 and Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
CFR 47 FCC Part 15;
Class A (industry)
The FCC 47 CFR Part 15 from the Federal Communications Commission: rules
and regulations for EMC.
EN 60204-1 : 2018
Safety of machinery - Electrical equipment of machines - Part 1: General re-
quirements
ICES-001
Industrial scientific and medical (ism) radio frequency generators
EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity for indus-
trial environments
EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for
industrial environments
EN 61326-1 : 2013 Table 2
Electrical equipment for measurement, control and laboratory use. EMC re-
quirements. General requirements
EN 61000-3-2 : 2019
Class A (industry)
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic
current emissions (equipment input current
≤
16 A per phase)
EN 61000-3-3 : 2013 + A1 : 2019 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems,
for equipment with rated current
≤
16 A per phase and not subject to condi-
tional connection.
EN 61010-1 : 2010 + A1 : 2019
+ A1 : 2019 / AC : 2019
Safety requirements for electrical equipment for measurement, control, and
laboratory use. General requirements
EN ISO 13849-1 : 2015
(1)
Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
EN ISO 80079-36 : 2016
(2)
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmos-
pheres - Basic method and requirements
