Transport | 3
Instruction Manual FOSSA FO 0015 A - FO 0035 B_EN_en
7 / 28
2.5 Optional Variants
2.5.1 ATEX (Optional)
According to ATEX classification, refer to the nameplate (NP), explosive gases and va-
pour mixtures (zone 2) can be drawn in according to the scope of the Directive ATEX
2014/34/EU.
2.5.2 Oxygen (Optional)
The machine is designed for conveying gases with an increased oxygen content (volume
content greater than 21% and up to 100%) if the following label is stuck on the ma-
chine body:
3
Transport
WARNING
Suspended load.
Risk of severe injury!
• Do not walk, stand or work under suspended loads.
• Make sure that the eyebolt(s) (EB) is/are in faultless condition, fully screwed in and
tightened by hand.
Machine weight:
see the technical data or the nameplate (NP)
• Check the machine for transport damage.
If the machine is secured to a base plate:
• Remove the machine from the base plate.
