BUSCH 7180551, Инструкция по установке и обслуживанию

Страница: 25 / 36

EU-Declaration of Conformity
This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the Busch scope of delivery. This
Declaration of Conformity is issued under the sole responsibility of the manufacturer. When this machine is integrated into a superordinate
machinery the manufacturer of the superordinate machinery (this can be the operating company, too) must conduct the conformity assessment
process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix the CE-mark.
The manufacturer: Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
declares that the machine(s) NC 0400 B
has (have) been manufactured in accordance with the European Directives:
–
“Machinery” 2006/42/EC
–
"ATEX Directive" 2014/34/EU for use in potentially explosive areas according to classification written on the machine nameplate
–
“Electromagnetic Compatibility” 2014/30/EU
–
“RoHS” 2011/65/EU + Commission delegated directive (EU) 2015/863, restriction of the use of certain hazardous substances in electrical and
electronic equipment
and following the standards:
Standard Title of the standard
EN ISO 12100:2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower limbs
EN 1012-1:2010
EN 1012-2:1996 + A1:2009
Compressors and vacuum pumps - Safety requirements - Part 1 and 2
EN ISO 2151:2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1:2006 + A1:2009 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) – Generic standards. Immunity for industrial environments; Part 1 and 3
EN 61000-6-4:2007 + A1:2011 Electromagnetic compatibility (EMC) – Generic standards. Emission standard for industrial environments
EN ISO 13849-1:2015
(1)
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design and 2
EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and
requirements
EN ISO 80079-37:2016
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of pro-
tection constructional safety “c”, control of ignition source “b”, liquid immersion “k”
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
Person authorised to compile the technical file: Gerd Rohweder
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Chevenez, 15.05.2019
Christian Hoffmann, General Director
(1)
In case control systems are integrated.