EU Declaration of Conformity
This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the Busch scope of delivery. This
declaration of Conformity is issued under the sole responsibility of the manufacturer. When this machine is integrated into a superordinate
machinery the manufacturer of the superordinate machinery (this can be the operating company, too) must conduct the conformity
assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix the CE-mark.
The manufacturer:
declares that the machine(s)
TAPIR HL 2216 A (p/n 0659230711 and 0659230714)
fulfil(s) all the relevant provisions from European directives:
–
"Low Voltage" 2014/35/EU
–
“Machinery” 2006/42/EC (Annex II, No. 1 A)
–
“Electromagnetic Compatibility” 2014/30/EU
–
"Restriction of Hazardous Substances" 2011/65/EU
–
"Waste of Electrical and Electronical Equipments" 2012/19/EU This directive does not imply CE marking.
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standard
Title of the Standard
EN 50581: 2013
Technical documentation for the assessment of electrical and electronic products with respect to the
restriction of hazardous substances
EN 61326-1: 2013
Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
EN 60204-1:2006
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU):
Busch Dienste GmbH
Schauinslandstraße 1
DE-79689 Maulburg
Busch Produktions GmbH
Schauinslandstraße 1
79689 Maulburg
EN 61010-1:2011
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1 :
general requirements
Maulburg, 21.06.2021
Dr. Martin Gutmann, General Manager
77
0870231897_0001_IM_en