Advanced settings
Fig. 1
1
:
Recording example
When the memory is full and if a recording is in progress, recording is automatically
stopped.
The
[Record]
key is replaced by the
[Mem full]
.
Recording
Press
[Recording]
.
7.1.6 Saving a recording
This function is used to save the most recent recording on a SD card to be played back/
analysed later on a PC. Saving is not automatic.
It is possible to save a screenshot of the recording (.bmp) or to generate a file (.txt) with
all the measurements taken. The .txt file allows a later processing: the default separator
is "tab"
Press on the screen and
[View Rec.]
.
Select the file type and press
[Save > SD]
(see 7.1.5)
.
Name the file and save it
.
The saved .bmp and .txt files include only the measurement points displayed on the
screen:
– to include all points, you must be positioned on the relevant plot (without zooming).
– if a zoom was carried out before saving, the zoom will apply only to the points of the
selected zone.
If the saved recording is made up of several consecutive recordings:
– the ▲ cursor will indicate each new recording on the .bmp files.
– "B.P. # xx" will be noted at the end of the last line of each recording in the .txt files.
.bmp files can be displayed on the control panel screen.
.txt files can be opened only from a PC: no possible reading from the control panel.
1 1
st
recording
2 2
nd
recording
3 3
rd
recording
1
2
3
Duration
Recording duration
Capacity
Total recording time according to recording duration
Duration
Maximum capacity
File size
0.2 s (min.)
6 hours 33 minutes
≈ 7 Mo
30 s (max.)
983 hours
36
0870231897_0001_IM_en