Burstner I 690 G, Инструкция по эксплуатации

Страница: 32 / 304

32
I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN
Before the journey
3
The load rack permits transport of a load weighing up to 130 kg. For the trans-
port of the load different attachments are available. They are e.g. bike rack or
a transport box. Our authorised dealers and service centres will be happy to
advise you.
The load rack (Fig. 7) permits transport of a motorcycle or a motor scooter
weighing up to 130 kg.
Scope of delivery The following parts belong to the scope of delivery:
z
Rack trough (Fig. 7,3) and retaining clip (Fig. 7,1) with attachment to
vehicle (Fig. 8)
z
Rear lights (Fig. 7,4)
z
Vehicle licence plate light (Fig. 7,5)
z
13-pole Jäger System plug
z
Ramp (Fig. 7,2)
Attachment to vehicle The two side members (Fig. 8,1) of the load rack are fixed to the floor of the
vehicle by means of tommy screws (Fig. 8,2) on the square drives (Fig. 8,4).
The load rack is secured by a bolt (Fig. 8,3) with locking ring.
Entry in the vehicle
documents
Have your dealer or service centre install the add-on parts. They will also take
care of all the formalities for you.
3.4 Towing
Z
Observe the country-specific regulations.
Z
Also read the manufacturer's instruction manual.
Fig. 7 Load rack Fig. 8 Attachment to vehicle
X
Care is to be taken when connecting and detaching a trailer. Risk of acci-
dent and injury!
X
No persons are to be between the towing vehicle and the trailer during
positioning for connecting and detaching.
X
Observe the permissible nose weight and rear axle load of the towing
vehicle. Nose weight and rear axle load must not be exceeded. The
values of the nose weight and rear axle load are included in the docu-
ments of the vehicle and the caravan coupling.