Burstner I 690 G, Инструкция по эксплуатации

Страница: 100 / 304

100
I-Modell - 13/14 - Ausgabe 08/13 - 2354644 - BUE-0056-07EN
Living
6
Opening:
„
Press the handle of the insect screen together. The latch is released.
„
Use handle to return the insect screen slowly to its initial position.
Shade To close and open the shade:
Closing:
„
Press together the handle (Fig. 115,5) of the shade.
„
Pull out the shade to the desired position and release. The shade will stay
in that position.
Opening:
„
Press together the handle of the shade.
„
Slowly return the shade to its initial position.
Fan If the skylight is open, the interior can be ventilated with the 6-speed fan
(Fig. 115,3). The fan is operated via the operating panel (Fig. 115,2).
Switching on:
„
Press the On/Off button (Fig. 116,2). The fan runs in comfort mode (venting
at slowest fan speed).
Venting:
„
To increase the fan speed: Press the Vent button (Fig. 116,1). The fan
speed in the venting direction increases by one level. LEDs (Fig. 116,4)
show the operating levels.
„
To lower the fan speed: Press the Aerate button (Fig. 116,3). The fan
speed decreases by one level.
Aerating:
„
To increase the fan speed: Press the Aerate button (Fig. 116,3). The fan
speed in the aerating direction increases by one step. LEDs (Fig. 116,4)
show the operating levels.
„
To lower the fan speed: Press the Vent button (Fig. 116,1). The fan speed
decreases by one level.
Boost function:
„
Press and hold the Aerate button for approx. 3 seconds. The fan switches
to the maximum aeration level and then, after approximately 5 minutes,
automatically switches back to the previously selected level.
„
Press and hold the Vent button for approx. 3 seconds. The fan switches to
the maximum venting level and then, after approximately 5 minutes, auto-
matically switches back to the previously selected level.
Switching off:
„
Press the On/Off button (Fig. 116,2). The fan stops, the LEDs go out.
6.11 Tables
Depending on the model and equipment, various types of tables may be
installed. The tables' features differ in the following ways:
Table leg Table-top Conversion to bed foun-
dation
Fixed table Screwed into the floor z Moveable
z Rotatable
Not possible
Suspension table
Single section Extendible Not possible
Z
Depending on the model, the tables can be adjusted in one or more of the
aforementioned ways.