Burstner CityCar 2016, Инструкция по эксплуатации

Страница: 91 / 150

91
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Appliances
9
Digital operating unit
CP plus
The operating unit is described in the "Hot-air heater" section.
Switching on hot water
production:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Heater/
boiler".
„
Turn rotary push button (Fig. 56,6) until the hot water menu symbol
(Fig. 59,2) flashes.
„
Press rotary push button.
„
Turn rotary push button until the required value is displayed:
z
OFF: Hot water production is switched off.
z
40°: Hot water is heated to 40 °C.
z
60°: Hot water is heated to 60 °C.
z
BOOST: Fast heating of hot water (boiler priority) for max. 40 minutes.
The water temperature is then held at a higher level for two reheating
cycles (approximately 62 °C).
„
Press rotary push button to save the value set. The symbol in the status
line (Fig. 56,2) flashes until the hot water temperature set is reached. If you
do not wish to change the value originally set: Press back button
(Fig. 56,7).
Switching off hot water
production:
„
Turn rotary push button until OFF is displayed. Press rotary push button to
save.
Safety/drainage valve The boiler is equipped with a safety/drainage valve (Fig. 60). The safety/
drainage valve prevents water in the boiler from freezing, when there is frost
and the heater is not switched on.
Fig. 59 Display
1 Heater
2 Hot water
3 Operating mode
4 Fan
5 Service menu
6 Timer
7 Warning symbol
8 Lighting (not used here)
9 Set time
Z
When the vehicle is not used for a long period of time, open the safety/
drainage valve and empty the boiler.
Z
At temperatures below 2 °C the safety/drainage valve opens automatically.
Only if the temperature of the safety/drainage valve lies above 6 °C can it
be shut again.
Z
The water pump and the water fittings are not protected against freezing by
the safety/drainage valve.
Z
The drainage neck of the safety/drainage valve has to be free of dirt (e.g.
leaves, ice) at all times.