Burstner CityCar 2016, Инструкция по эксплуатации

Страница: 88 / 150

88
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Appliances
9
„
Turn rotary push button until required value is displayed.
„
Press rotary push button to save the value set. The symbol in the status
line (Fig. 56,2) flashes until the room temperature set is reached. If you do
not wish to change the value originally set: Press back button (Fig. 56,7).
Switching off the heater:
„
Turn temperature value back until OFF is displayed. Press rotary push
button to save.
Producing hot water Obtaining hot water is described in the "Boiler" section.
Setting the fan:
„
Turn rotary push button (Fig. 56,6) until the fan menu symbol (Fig. 57,4)
flashes.
„
Press rotary push button.
„
Turn rotary push button until the required value is displayed:
z
OFF: Fan is switched off.
z
VENT: Air circulation
z
ECO: Low fan setting
z
HIGH: High fan setting
z
BOOST: Fast room heating. Boost is available if the current room tem-
perature is at least 10 °C below the selected room temperature.
„
Press rotary push button to save the value set. If you do not wish to change
the value originally set: Press back button (Fig. 56,7).
Setting the timer:
„
Turn rotary push button (Fig. 56,6) until the timer menu symbol (Fig. 57,6)
flashes.
„
Press rotary push button. The start time is displayed and the hour display
flashes.
„
Turn rotary push button until the hour of the selected start time is displayed.
„
Press rotary push button. The minute display flashes.
„
Turn rotary push button until the minute of the selected start time is dis-
played.
„
Press rotary push button.
„
Proceed in the same way to set the switch-off time, the required room tem-
perature, the hot water setting and the fan setting.
„
Press rotary push button. The timer is activated. The timer symbol
(Fig. 57,6) flashes when the timer is programmed and active.
Z
The required room temperature can also be changed in stand-by mode by
turning the rotary push button.
Z
The service menu contains items that generally only need to be set once
(language, background brightness, calibration), as well as information for
service centres (version numbers).