Burstner CityCar 2016, Инструкция по эксплуатации

Страница: 60 / 150

60
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Gas system
7
7.2 Gas bottles
X
The built-in gas devices are exclusively meant for use with propane or
butane gas or a mixture of both. The gas pressure regulator as well as
all built-in gas devices are designed for a gas pressure of 30 mbar.
X
Propane gas is capable of gasification up to -42 °C, whereas butane gas
gasifies at 0 °C. Below these temperatures no gas pressure is available.
Butane gas is unsuitable for use in winter.
X
Regularly inspect the gas tube fitted to the gas bottle connection for
tightness. The gas tube must not have any tears and must not be
porous. Have the gas tube replaced by an authorised specialist work-
shop no later than ten years after the manufacturing date. The operator
of the gas system must see to it that the parts are replaced.
X
Due to its function and construction, the gas bottle compartment is a
space which is open to the exterior. Never cover or block up the standard
forced ventilations. Otherwise gas that is emitted can not be diverted to
the outside.
X
The gas bottle compartment must not be used as storage space.
X
Secure the gas bottle compartment against unauthorised access. To do
this, lock the compartment.
X
The regulator tap on the gas bottle must be accessible.
X
Only connect gas-operated devices (e.g. gas grill) which have been
designed for a gas pressure of 30 mbar.
X
The exhaust gas pipe must be fitted tightly to the heating system and to
the vent and must be sealed. The exhaust gas pipe must not show any
evidence of damage.
X
Exhaust fumes must be able to escape into the atmosphere unhindered
and fresh air must be able to enter unhindered. For this reason, keep the
exhaust pipe and intake openings clean and unobstructed (e.g. free from
snow and ice). For this reason, no snow walls or aprons may lie against
the vehicle.
X
Gas bottles are only to be transported within the designated gas bottle
compartment.
X
Place the gas bottles in vertical position in the gas bottle compartment.
X
Fasten the gas bottles so that they are unable to turn or tilt.
X
Connect the gas tube to the gas bottle without tension.
X
If the gas bottles are not connected to the gas tube, always place the
protective cap on top.
X
Close the regulator tap on the gas bottle before the gas pressure regu-
lator or gas tube are removed from the gas bottle.
X
Use your hands only to connect the gas pressure regulator or the gas
tube to the gas bottles. Do not use any tools.
X
Only use special gas pressure regulators with a safety valve designed
for vehicle use. Other gas pressure regulators are not permitted and
cannot meet the demanding requirements.